Raalte – Salland Port

Raalte – Salland Port

Delivered in: 2017 Client phase 1: Timmerhuis Weg- en Waterbouw b.v. Client phase 2: REKO Grondverzet- & Wegenbouwbedrijf Location: Raalte Application: Walls and soil retaining walls
We were allowed the placement of gabions in two phases for the project Salland Port in Raalte. This involved both walls and soil retaining walls.
Phase 1 Construction
Executed for Timmerhuis Weg- en Waterbouw b.v. We first prepared the design drawings. 18m1 soil retaining gabion wall with a diameter of 500×600 mm. 68m1 detached gabion wall of 500×600 mm and 300×600 mm. The mesh width for all of these walls is 50×100 mm.
Phase 1 Filling
The filling was applied mechanically. It was then set manually on all horizontal and vertical face sides of the gabions. The stone used is a Grauwacke split, 80/150 mm.
Phase 2 Construction
Executed for REKO Grondverzet- & Wegenbouwbedrijf. As in the preceding phase, we also prepared the design drawings for phase 2, after which we applied 286m1 of soil retaining wall, 975×750 mm. In addition, we made 286m1 of soil retaining wall in 525×750 mm. A mesh width of 75×75 mm is used on the face sides.
Phase 2 Filling
The stone filling was then stacked by hand on the face sides. The stone used is a Grauwacke split, 90/150 mm.